
Asphalt Paving Machine Operator
- Pittsburgh, PA
- Permanent
- Full-time
- Understand and execute paving procedures while following instructions to meet the standards of the project
- Must follow safe operation of paver
- Must be able to set screed sensors
- Must be able to determine the placement of materials correctly
- Daily maintenance (lubrication), keeping equipment clean, safe pre-start including daily fluid level checks on oil, water and fuel
- Responsible for daily maintenance of equipment to remain in proper and safe working order
- Responsible for notifying supervisor if equipment needs to be repaired
- Visual safety inspection for leaks and damage to machine before operation
- Understand, meet and plan grade cross slope requirements
- Understand the head of material for the screed
- Setting of flow
- Ability to be a leader
- Ability to operate equipment holding a straight line
- Keep equipment clean
- Proper paving speed to match truck delivery
- Adjust screed crown and strike off
- Set up and use automatic grade and slope control
- Understanding methods of paving to prevent segregation
- General knowledge of hydraulic and electrical systems of the paver
- Must be able to work in a team environment safely and successfully
- Perform incidental work items and duties included within other crafts
- A high school diploma or general education degree (GED) is preferred.
- Must be able to understand work directions and communicate effectively with job site supervisors and fellow employees.
- Three to Five (3-5) years or more of industry related experience is required for this position, with an emphasis on roads, highways, and bridges.
- Must have knowledge of and be able to understand paving procedures.
- Constant physical effort, including standing, is required during a regular work shift of at least eight hours per day. Employee must be able to stand for extended periods of time, and to stoop, bend, and crouch as required to perform Key Duties.
- Frequently work with hands extended overhead, sometimes in conjunction with the operation of hand power tools.
- Ability to lift, on a frequent basis, at least 50 pounds and carry at least 30 pounds personally, and up to 150 pounds with assistance.
- Manual dexterity to hand-carry generators, lumber and other construction materials, forms, power tools, and hand tools.
- Maintain constant alertness to the multiple concurrent activities of the construction site, including the activities of other employees and contractors, the operation of stationary equipment, and the movement of mobile equipment.
- Frequently walk on uneven surfaces, including natural ground in varying weather conditions.
- The Operator must be able to climb on and off heavy mobile equipment safely.
- Work is performed outdoors in all weather conditions.
- Work environment periodically exposes the employees to high levels of noise, grease, and dust that is typically associated with a construction project.
- Employee regularly works near heavy equipment and moving machinery.
- Work may involve a variety of substances commonly found on construction sites such as oil, asphalt, grease, gasoline, and diesel fuel.
- Must be able to work flexible schedule which includes days and nights.
- Assess work environment for possible hazards and makes sure training is adequate to the task.
- Has proper personal protective equipment and tools, uses them appropriately for the given task.
- Speaks up if seeing an unsafe act
- Identifies and turns in near miss reports
- Asks for help, when needed, to perform tasks safely.
- Considers if there is a safer way to perform work and communicates.