Maintenance Team Member
Diageo
- Plainfield, IL
- Permanent
- Full-time
- Perform all job functions safely.
- Bend and twist inside restricted spaces eg working inside or underneath isolated machines.
- While performing the duties of the job, employee will be regularly exposed to work near moving mechanical parts.
- Must regularly lift, push or pull machine parts up to +50 lbs
- Must be able to climb ladders and work at elevation
- Occasionally exposed to outside weather in all conditions.
- Occasionally exposed to chemicals used in the process.
- Regularly exposed to a noisy environment.
- Work in and around machinery
- Must wear all required Personal Protective Equipment (PPE) including hearing protection, safety glasses, safety toed shoes, cut resistant gloves, bump cap or hard hat, hair net, and beard net (if applicable).
- Extreme heat and humidity
- Occasional in climate weather
- Noise
- Wet, slippery
- Lifting is performed with assistance of other workers / equipment
- Install and maintain packaging/bottling and labeling equipment
- Read variety of electrical prints to troubleshoot electrical systems, electrical photo-eyes, and relays
- Working with Programmable Logic Controllers (PLC) (i.e. understanding instructions, editing documentation, and/or navigation for A-B PLC-5, A-B SLC-500, Control Logix, Drive Executive, Devicenet/Controlnet/Ethernet)
- Oversee packaging facility and ensure repairs are done and equipment is ready
- Troubleshooting mechanical breakdowns (i.e. pinpointing, reading schematics, and repairing problems associated with high speed manufacturing line breakdowns)
- Working with hydraulic systems (i.e. understanding high-pressure cylinders, pumps, or valves and reading schematics and using for troubleshooting in high-speed manufacturing)
- Working with pneumatics (i.e. working with solenoids, cylinders, or motor brakes and reading schematics and using for troubleshooting in high speed manufacturing)
- Working with electrical systems (i.e. working with high voltage, installation, frequency drive experience, motor testing, troubleshooting, or panels in high speed manufacturing)
- Performing preventative maintenance (i.e. conducting computerized preventative maintenance check-ups or reading SPC charts and data)
- Line manufacturing support systems (i.e. ozone generation, line/lube delivery, chemical delivery, ingredient delivery)
- Conveyors (i.e. air cylinders, diverters, sensors, motor/speed control/VFDs)
- Attend daily Tier 1 shift-based meetings and discuss daily maintenance plan
- Chip in and/or own tier 2 improve project up to and including RCM project ownership (training provided)
- Uses machine shop instrumentation and equipment to fabricate repair parts as needed.
- Write follow up work orders with appropriate information for defective equipment using CMMS system (SAP)
- Maintains equipment parts and supplies inventories through accurate withdrawal from stock using SAP
- Occasionally required to operate equipment such as scissor lift, man lift, and forklift
- Follow Good Manufacturing Procedures (GMP), perform tasks per the Master Sanitation Schedule (MSS) and follow general housekeeping guidelines and rules for Food Safety Regulations. Keep area updated with 5S.
- This position requires frequent lifting, climbing, standing, walking, crouching, squatting, bending and kneeling
- Maintenance experience is required.
- Minimum 3 years of work experience in installing, operating, trouble-shooting, and maintaining equipment within a manufacturing environment.
- Knowledge of hydraulics and pneumatics.
- Must have PLC and/or a strong electrical background.
- Experience in a fast-paced packaging facility preferred.
- Knowledge of power transmission.
- Must have own hand tools.