Machine Operator

• Read schedule to determine timing for solutions and changeovers needed at coating machines.

• Stop and start operation of machine using control panel

• Align or fasten machine parts such as rollers and blades using hand tools.

• Thread or feed film through rollers, and adjust temperature, speed and flow rate of product or machine.

• Observe machine and product during operation to detect defects or deviations from specification, and make machine adjustments to temperature, speed and flow.

• Perform a variety of machine setups and operations to imprint a coating, and design onto various film, and rewinding, as well as material handling and finished product.

• Examine, measure, weigh and/or test product to ensure conformance to specifications. Follow testing procedures and operate quality testing equipment. Make pass/fail decision, may consult with supervisors and/or technical staff on questionable items.

• Clean machine and parts between runs (one to several times per shift). Confined space entry may be required (machine specific).

• Material handling of product and machine parts (load, unload, pack, and transport) using carts, pallet jacks or forklift/fork truck. Some heavy lifting is required.

• Move 55-gallon drums and using barrel carts or pallet jacks.

• Operating and driving a Forklift/Fork truck.

• Operate and setup machines that mix chemicals, apply coatings

• Use computer equipment to print production run sheets and labels and perform QA testing.

• Follow hazardous material handling requirements when working with solvents.

• Attain thorough knowledge of all product codes, color numbering system, formulas, thinning solvents and jumbo tag system.

• Cross train and operate equipment in other teams and assist other operators as needed.

• May be required to mix ink/paint.

• Record production run quantities following SOP’s, job order, and perform quality controls checks on product and materials.

NESC Staffing