CDL Ready- Mix Truck Driver-100% Medical Insurance paid
Constructors Inc
- Hobbs, NM
- Permanent
- Full-time
- Drive trucks over variety of terrains
- Manipulate bilateral controls to operate machinery
- Multiple tasks requiring sustained twisting and turning of the spine while driving and manipulating controls
- Climb in and out, on and off equipment
- Repetitive shoveling/raking/sweeping material
- Lifting a variety of heavy objects on and off trucks and equipment
- Daily inspection of equipment and equipment maintenance
- Be a customer service representative for internal and external customers
- Check all fluid levels, grease equipment, and perform any other checks to complete a daily walk around inspection required by DOT and complete and turn in required forms daily to shop
- Haul any material necessary for jobs either internal or external
- Follow all safety guidelines at all times.
- Perform any labor work deemed necessary by the Supervisor/Foreman.
- Fill out time cards daily including equipment number, hours, and job number when applicable
- Ensure that any truck driven is maintained according to company policy (pre-trips, housekeeping, reporting of malfunctions)
- Drive trucks only within your class and endorsements
- Walking: Frequent. Requires the ability to walk on various types of surfaces and terrain, including construction sites and mountainous terrain.
- Lifting/Carrying: Frequent. This position is classified as "Medium Work". This requires the ability to exert up to 75 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.
- Climbing: Frequent. Requires the ability to climb in and out of heavy trucks up to 5 steps, 4" width, 16" apart. Ability to climb on and off heavy equipment in awkward positions.
- Spinal Rotation: Continuous. Requires full spinal rotation with ability to sustain position for up to 10 seconds.
- Push/Pull: Continuous. Requires the ability to work levers of less than 10 pounds of force with greater than twenty pounds of force occasionally.
- Balance: Frequent. Requires the ability to balance self with both extremities while climbing on heavy equipment or while working in awkward positions on uneven terrain usually while carrying tools..
- Reaching: Frequent. Requires the ability to utilize full upper extremity range of motion to operate controls and assist in labor tasks such as shoveling or raking.
- Grasping/Handling: continuous. Requires the ability to grasp a steering wheel control and fine motor dexterity to manipulate operator controls of various size (1/2 - 2") and shape (cylindrical and round). Requires a gross grasp to maintain hold of long handled tools. Occasional use of vibrating tools will be encountered during control use.
- Long Handled Tool Use: Occasional. Requires the ability to perform safe, neutral spine technique for shoveling and/or raking material weighing 25 to 50 pounds.
- Vision: Continuous. Requires the ability for environmental awareness at construction site as well as good depth perception to accurately determine if surfaces are level.
- Climate: Continuous. Requires the ability to tolerate extreme temperatures.
- Endurance: Excellent. Requires the ability to tolerate up to 10 - 14 hour days; 7 days a week.
- Hearing: Occasionally. On the plant site, this position requires the ability to communicate by radio to plant operator and drivers. Communication is currently accomplished over a speakerphone. On a job site, hand signals are the predominant form of communication; therefore, hearing is not a requirement depending on the type of equipment utilized. This task is performed in conjunction to the previous demands listed.
- Safety equipment provided by employer: safety vest, hardhat, hearing protection, safety glasses.
- Heavy equipment: various types of trucks used for hauling materials.
- Ability to build positive customer relations even with difficult customers.
- Ability to get along with coworkers.
- Must be dependable.