Marine Electrician
CTR Group
- Norfolk, VA
- Permanent
- Full-time
- Assures that tank/compartment has an updated safe for hot work ticket and that requirements of the ticket have been met. (Example: ventilation, lighting, safety equipment etc.).
- Assures that conditions of the tank/compartment have not changed since the ticket was written. (Example: fuel run back, unsafe working conditions, etc.).
- Assures that a Work Authorization Form (WAF) ticket is on the job site and that it is for the specific job being accomplished, no work will be accomplished without a WAF posted at location of repairs.
- Assures that any other safety issues are complied with that relate to the specific job being accomplished (Example: special staging, face shields for grinding, protective clothing for hot work related jobs, breathing apparatus with correct cartridges, etc).
- Assures that you are trained or qualified for the work you are assigned to do (Example: JLG, forklift, welding, brazing, special electrical/mechanical repairs and etc.).
- Assures that you and personnel working under your direction are working as safely and as productively as possible maintaining quality control at all times.
- Assures that a 30 minute cool down period has been accomplished in hot work areas.
- Assures that the job site is left in a safe and clean condition prior to departure.
- Complete electrical repairs or installation(s) as assigned with supervision.
- Must have knowledge of electrical hook-up, their own electrical tools and PPE
- Must have basic knowledge of ship’s compartmental layout.
- Must be able to climb on and around ships and walk to other yard areas and requires extended periods of standing and walking (75%).
- Be able to install temporary services using correct wire and breaker sizes; complete work under direction of supervisor.
- Standing, bending, sitting, reaching, pushing, pulling, crouching, kneeling, handling, finger dexterity, feeling, eye/hand/foot coordination, seeing, hearing required.
- Inspections and work may require climbing ladders, working at heights, walking on scaffolding, and observing co-workers using tools and equipment.
- Lifting/carrying tools and parts weighing up to 50 lbs. on frequent basis
- Works in tight, confined workspaces on board ship and is exposed to varied temperatures, wind, wet and humid conditions, fumes, odors and dust, vibrations from ship and hand tools.
- Visual Requirements: Must be able to pass a Standard Jaeger’s Test chart for near vision acuity reading J1 letters or equivalent with or without corrective aids and pass a color vision test using Ishihara’s Tests for Color Deficiency.